Connecting To Video Display; Connecting To Lcd Or Crt Monitor; Connecting To Hdtv Set; Connecting To Conventional Tv Set - AOpen MP945-VX User Manual

Connecting to Video Display

You can connect the system to many types of video display devices, including projector, LCD
or traditional cathode ray tube (CRT) monitor, or TV unit.
Connecting the LCD or CRT Monitor
You can connect the system to an LCD monitor. The video signal connector from the LCD
monitor connects to the DVI connector through a DVI cable. If you want to connect the system
to a CRT monitor, you have to use a DVI to VGA&DVI converter as illustrated in System
Installation Diagram in chapter 1.

Connecting to HDTV Set

There is an S-Video connector on the back of the rear panel. You can use an "S-Video to
S-Video/YPbPr/Composite Video" cable to connect your system to a TV unit. On most high
quality TV unit, you can find the YPbPr inputs. On one end of the "S-Video to S-Video/YPbPr/
Composite Video" cable, you can find the blue, green, red connectors, which are generally
referred to as the YPbPr connectors. If your TV unit has YPbPr inputs, connect the YPbPr
connectors to the YPbPr inputs of your HDTV unit or TV tuner.

Connecting to Conventional TV Set

The S-Video connector of the "S-Video to S-Video/YPbPr/Composite Video" cable comes
in black color. In case your TV unit only has S-Video input, you can connect the S-Video
connector to the S-Video input of your TV set. Some old TV units may only have Composite
Video input. The Composite Video connector comes in yellow. In case your TV only has
Composite Video input, connect the Composite Video connector to the Composite Video input
of your TV set.