Connect The Power Supply - Cisco 1600 series Quick Start Manual

Install the Router (continued).
C. Connect the power supply.
After connecting the router to power and turning it on, you can confirm that you have installed the router
correctly by checking certain LEDs. Connect the router to the power supply as shown below. Depending on
where you are installing the router, your power supply and power outlet could be different from those in the
picture.
Step 1
Connect the power supply cord to the power socket on the rear panel.
Step 2
Connect the power supply to a power outlet.
Confirm that the router has power by checking that the SYSTEM PWR LED on the front panel is on.
Step 3
Confirm that the router has power by checking that the SYSTEM PWR LED on the front panel is on.
6