D-Link DSL-3590L User Manual page 72

Section 4 - Configuration
In the Settings menu on the bar on the top of the page, click Internet to see the
Internet configuration options. Click Advanced Settings... to expand the list and
see all of the options.
WAN Access Select whether the device should act as an ADSL Router or a
Residential Gateway.
Type:
PVC: Use the default setting unless otherwise instructed by your ISP.
If you selected Residential Gateway, select the Ethernet port that
Ether WAN Port:
will connect to the WAN.
Enable Tagged Enable or disable tagged VLAN.
Vlan:
VLAN ID: Enter the VLAN ID.
VLAN Priority: Enter the VLAN Priority from the default 0 (lowest) to 7 (highest).
My Internet Choose your Internet connection type from the drop-down menu.
Connection Is:
You will be presented with the appropriate options for your
connection type.
For Dynamic IP (DHCP) refer to Dynamic IP (DCHP) on page 69.
For Static IP refer to Static IP on page 70.
For PPPoE refer to PPPoE on page 71.
For PPPoA refer to PPPoA on page 72.
For Bridge refer to Bridge on page 73.
D-Link DSL-3590L User Manual 68