Connecting The Rjp (Remote Jack Pack) - Samsung 460 Installation Manual

Output to any external source connected to RJP on the hotel desk.
RJP
1. Connect the PC IN / PC/DVI AUDIO IN
2. Connect the AV IN [VIDEO]/[L-AUDIO-R]
3. Connect the AV IN [VIDEO]
4. Connect the HDMI IN
5. Connect the RJP
✎ The RJP (Remote Jack Pack) compatible with this Samsung TV is TeleAdapt TA-7610, TA-7650 (HD) and TA-
7660 (HD Plus).
• RJP (Remote Jack Pack): RJP stands for Remote Jack Pack. The RJP is a hardware module that has different
Audio Video inputs (A/V, Audio, PC and HDMI) and corresponding outputs. The corresponding output sources are
connected from the RJP to the TV. The RJP communicates with the TV via RS232. The Hot Plug & Play function
allows hotel guests to connect an external source to the RJP. The RJP communicates with the TV by sending mes-
sages regarding Active/ Inactive sources. The TV will switch to the Active external source according to the priority set
by the User.
✎ You can select
✎ When the TV is on, connect the TV and the RJP within 10 seconds.
[HC460-465-EU]Install-Guide-X0ENG.indd 13

Connecting the RJP (Remote Jack Pack)

3 Video Cable
TV Rear Panel
VIDEO AUDIO
HDMI IN
(DVI)
ANT IN ANT IN
PC / DVI PC / DVI
AUDIO IN AUDIO IN
PC IN
port of the TV to the PC/AUDIO port of the RJP.
port of the TV to the VIDEO port of the RJP.
port of the TV to the VIDEO port of the RJP.
port of the TV and the HDMI port of the RJP.
port of the TV and the RS/232 port of the RJP.
and for connecting the RJP.
HDMI IN AV IN
RJP Rear
USB HDMI VIDEO AUDIO AUDIO/PC
4 HDMI cable
2 Audio Cable
5
1 D-sub / PC Audio cable
13
English
2014-07-14 10:04:34