LG RDJT50 1024X768 XGA User Manual page 12

3. ZOOM IN/ OUT
By pressing ZOOM IN +, the center of the picture will be magnified. When
the + button is pressed again, the picture is further magnified, up to four
times the original size. By pressing ZOOM OUT -, the size of the image is
reduced. When the - button is pressed again, the picture is further reduced
until it is restored to its original size. To return to the normal display mode,
press the RETURN button. (This function can be used in combination with
FREEZE. )
4. FREEZE
The image is frozen when FREEZE is pressed. A "Pause" icon will appear in
the lower right corner of the screen. To stop the freeze function, press the
FREEZE button, RETURN button or SOURCE button (when the input
source is switched over during display) again.
5. PIP SOURCE, PIP POS., PIP SIZE
By pressing the PIP-Source, PIP-Pos and PIP-Size buttons, you can enable
the PIP (Picture In Picture) function and choose the position and size of the
PIP image.
6. RATIO
By pressing the Ratio button, you can select the screen aspect ratio you
prefer: 4:3,16:9 or native input source resolution in RGB or DVI mode (when
the input source's resolution is lower than the projector provides, you don't
need to rescale the image.).
7. RETURN
Back to the last state from "ZOOM", "BLANK", "FREEZE" or "PIP".
8
DLP Personal Projector