Advertisement
SPECIFICATIONS
DIMENSIONS:
AX-DV-XP
PROGRAMMING:
See programming instructions included with the required XP-KIT Programming Starter Kit (sold separately).
Note: Do not attempt to program or use the AX-DV-XP / AX-DVF-XP door station without first reading
the initialization instructions included with the XP-KIT Programming Starter Kit!
SPECIFICATIONS:
CARD READER:
Power Source:
Current Requirements:
Terminations:
Operating Temperature: -10°~60°C / 14°~140°F
Operating Humidity:
FCC WARNING:
This device complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference that may cause undesired operation.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
12V DC
40mA (Avg)
Color-coded pre-wired pigtail
0-95% relative humidity
non-condensing
For proper regulatory compliance, the drain wire should be disconnected at the
power supply end of the cable.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
The Reader is intended to be powered from a limited power source output of a
previously certified power supply.
TOLL FREE TECHNICAL SUPPORT:
E-MAIL: tech@aiphone.com
AX-DVF-XP
DOOR STATION:
Power Source:
Camera unit:
Scanning line:
Min. illumination:
Terminations:
Operating Temperature: -10°~60°C / 14°~140°F
Wiring Distance:
(800) 692-0200
AX-series CEU
CCD Camera
525 lines
5 Lux at 1' or less
RJ-45
980ft w/ CAT-5e wire
AX-DV(F)-XP Instr.
Pg. 4
0608TB
Advertisement
