LG LMV1625W Service Manual page 17

B. REMOVING THE OUT CASE(Figure 8)
(1) Remove the vent grille by removing two screws
securing it to the out case.
(2) Remove two screws securing it to the front bracket.
(3) Remove two screws securing it to the air duct.
(4) Remove the mounting plate by turning the two
screws securing it to the out case.
(5) Remove the base plate by removing six screws
securing it to the out case. Remove the Mount,
All from the out case by removing two screws
securing it to the out case and one screw securing
it to the ventilation motor ASS'Y and cavity.
Door
Vent Grille
(6) Remove the power cord cover from outcase by
removing a screw.
(7) Remove the power cord to the inner of the out
case with turning power cord and remove the out
case with pushing it back.
Mount, All
Controller
Figure 8
7-6
Power code
Mounting
Plate
Out Case