Table of Contents
Advertisement
Driver Installation
Before you connect the 10/100Mbps PCI bus Card
to the network, you have to install the network
driver first. The driver for each networking
operating system is under a separate directory. A
HELP.EXE file under root directory lists the
information and detailed installation procedure of
all the available drivers.
Boot ROM Installation
The optional Boot ROM device allows you to
connect a diskless workstation to the network.
Perform the following steps to install your Boot
ROM device:
Note: Install the optional remote boot ROM before
installing the card.
Note: Before handling the remote boot ROM chip,
discharge any static electricity on your body by
touching a grounding surface such as the chassis of
the PC.
1.
Align the notch and pins of the ROM chip
with notch and pinholes on the socket. Insert
the Boot ROM into the socket on the adapter
until it is firmly seated.
2.
Execute the SETUP.EXE file to enable the Boot
ROM function by selecting the appropriate
Boot ROM address from the setup menu.
Advertisement
Table of Contents
