Class 1 Laser Product - Pioneer BDP-85FD Operating Instructions Manual

Thank you for buying this Pioneer product. Please read through these operating instructions so you will
know how to operate your model properly. After you have finished reading the instructions, put them
away in a safe place for future reference.
IMPORTANT
A.
CAUTION: The lightn ing fl ash with arrowhead symbol,
with in an equilateral triangle, is intended to
alert the user to the presence of uninsulated
"dangerous vol tage" within t he prod uct 's
enclosure that may be of sufficient
magnitude to constitute a ri sk of electric
shock to persons.
TO PR EVENTTHE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR
BAC K). NO USER-SERVICEAB LE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
The exclamation point within an equilateral
t riangle is intended to alert the user to the
presence of important operating and
ma intenance (servicing) instru ct ions in the
literature accompanyi ng the appli ance.
CAUTION
This product is a class 1 laser product classified
under the Safety of laser products, I EC 60825-1 :2007,
but thi s product co ntains a lase r diode higher than
Class 1. To ensure continued safety, do not remove
any covers or attempt to gain access to the inside of
the product.
Refer all servicing to qualified personnel.
I
CLASS 1 LASER PRODUCT
I
The fo llowing caution label appears on your un it.
Location: inside of the unit
058-5-2-2b*_B1 _En
WARNING
This equipment is not waterproof. To prevent a fire or
shock hazard , do not place any containerfilled with
liquid near th is equipment (such as a vase or flowe r
pot) or expose it to dripping , splashing, rain or
moisture.
03-4-2-1-3_A 1_En
Operating Environment
Operating environment temperature and humidity:
+5 octo +35 oc (+41 oF to +95 oF); less than 85 %RH
(cooling vents not blocked)
Do not install this unit in a poorly ventilated area, or in
locations exposed to high humidity or direct sunlight (or
strong artificial light)
03-4-2-1-7c* _A 1_En
03-4-2-1-1b_A 1_En
WARNING
To prevent a f ire hazard, do not place any naked flame
sources (such as a lighted candle) on the equipment.
D3-4-2-1-7a_A1 _En
VENTILATION CAUTION
When installing this un it, make sure to leave space
around the unit for ve ntilation to improve heat radiation
(at least 10 em at top, 10 em at rear, and 10 em at each
side).
WARNING
Slots and openings in the cabinet are provided fo r
ventilation to ensure reliab le operation of the product,
and to protect it from overheating. To prevent fire
hazard , the openings should neve r be blocked or
cove red with items (such as news papers , table-cloths,
curtains) or by operating the equipment on thick carpet
or a bed .
03-4-2-1-7b* _A1 _En
CAUTION
The
o
STANDBY/ON sw itch on this un it will not
completely shut off all power from the AC outlet.
Since the power cord serves as the main disconnect
device for the unit. you will need to unp lug it from the
AC outlet to shut down all power. Therefore, make
sure the unit has been installed so that the power
cord can be easily unplugged from the AC outlet in
case of an accident. To avoid fire hazard , the power
cord should also be unplugged from the AC outlet
when left unused for a long period of t ime (for
example , when on vacati on).
03-4-2-2-2a* _A 1_En
This product is for general household purposes. An y
failure due to use fo r other than household purposes
(such as long-term use for business purposes in a
restaurant or use in a car or ship) and which requires
repair will be charged for even during the warranty
period.
K041_A1_En