Charging; Low Battery; Power On; Power Off - LG HBM-730 User Manual

How to use

Charging

- Remove the cover on the charging port and connect the charger.
- When the charger is connected, with power on or off, the Headset
will turn off. While charging, the LED indicator will show a solid red light.
- The buttons will not function while the device is charging.
- It takes 2 hours to fully charge the Headset.
- When charging is complete, the LED indicator will turn off.

Low battery

- A low battery tone will play once every 30 seconds.
- When the battery is not charged, the Headset will turn off.

Power on

- Press and hold the PWR/END button for 2 seconds.
�The power will turn on and a booting tone will play.

Power off

- Press and hold the PWR/END button for 5 seconds.
� A shutdown tone will play, the Bluetooth link will disconnect,
and the power will turn off.

Pairing

- Prior to using the Headset for the first time, you must pair it
with a Bluetooth- enabled handset.
- With the HBM - 730 off, press and hold the PWR/END button for 5 seconds.
� You will hear a pairing tone and the LED indicator will stay red,
when the device enters Pairing Mode.
▶Using your handset, find the Bluetooth Menu and "search for" or
"add" new devices.
▶Select "LG HBM - 730" from the list of devices and pair it with your handset.
�When asked for the Pass/PIN code during the pairing procedure,
please enter "0000" (4 Zeros).
� Once pairing has completed successfully, you will hear a beep.
6
�After pairing successfully, be sure to "Connect" to the LG HBM - 730.
▶If you want to pair with other devices in the future, the Headset
must be placed in Pairing Mode.
�If it will be not connected the "Pairing" for three minutes, the
Headset will turn off automatically.

Auto Reconnect

- When the HBM - 730 turns off accidentally or intentionally during
connected condition, the headset and handset will disconnect.
The Headset and handset will automatically reconnect without
pairing when the HBM - 730 turns on.
[ Out of range ]
- When the HBM - 730 and your handset are separated by a distance
of 33 feet (1 0 meters) or more, the Headset and handset will
disconnect. When the handset and HBM - 730 are brought back
within the required distance, the HBM - 730 will automatically
reconnect with the handset.
- If the Headset and handset do not automatically reconnect when they
are back within the required range, briefly press the PWR/END
button to reconnect manually.

Volume control

- Press the VOLUME UP or VOLUME DOWN button to adjust the
speaker volume.
- There are eight levels of speaker volume.

Calling

Answering a call

- When there is an incoming call, the Headset will ring.
- Briefly press the PWR/END button to answer an incoming call.
How to use
7