Advertisement
3. Press [
ADV] to make a selection between 12-hour
and 24-hour format.
4. Press [MODE] the hour digits will flash.
5. Press [
ADV] to advance the numbers until the
appropriate hour digit is displayed.
Note: Holding down the button will increase the
value rapidly.
6. Press [MODE], the minute digits will flash.
7. Again, press [
ADV] to advance the numbers until
the appropriate minute digit is displayed.
8. Press [MODE], the "seconds" will flash.
9. To adjust the "seconds" to zero, press [
10. Press [MODE] to exit the setting mode.
The clock is now set.
Note: If no buttons are pressed for 60-seconds during
the clock-setting function, the unit will
automatically exit the clock-setting mode.
THE TIMER
The timer can count down from a pre-set time. The unit will
count down from a maximum time of 29-hours, 59-minutes
to zero. In count-down timer mode, once the unit reaches
zero it will stop and an alarm will sound.
To indicate that the unit is in timer mode a [
will be displayed .
To set the timer:
1. Enter timer display.
ADV].
Note: If the clock is displayed, press [MODE] to
enter the timer mode. From pulse mode, press
[PULSE] to exit followed by [MODE] to toggle
between clock and timer displays.
2. To set the timer, press and hold [MODE] for 2 seconds.
The hour digits will flash.
3. Press [
desired time.
4. Press [MODE] and the minute digits will flash.
4
ADV] to advance the hour digits to the
] timer icon
Advertisement
