External Equipment Connection; Antenna Connection; Scart Jack; A/V Inputs - Majestic TM154 User Manual

External Equipment Connection

You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.

Antenna connection

1. Connect RF out on the VCR to the
Antenna input on the rear of the TV.
2. Connect the antenna cable to the antenna
in jackon the VCR.
3. Press the TV/AV button to select Antenna
Input source.
4. Press the PLAY button on the VCR.
COMPONENT INPUT
1. Connect the Video outputs (Y Cb Cr) on a DVD to
the COMPONENT input on the TV.
2. Connect the audio cables from the DVD to the
COMPONENT L (MONO), R inputs on the TV.
3. Use the TV/AV button to select COMPONENT mode.
4. Press the PLAY button on the DVD.
A/V INPUT
1. Connect the A/V out jacks on a VCR to A/V-IN
jacks on the TV.
2. Use the TV/AV button to select VIDEO mode.
3. Press the PLAY button on the VCR.
The VCR playback picture appears on the TV screen.
Note : If you have a mono VCR, connect the audio cable
from the VCR to the L(MONO) socket of the set.

Headphone jack

Insert the headphone plug to the headphone jack on the TV. You can listen to the
sound through the headphone; and the speaker on the TV. To adjust the headphone
volume, press the VOLÏq button. If you press the MUTE button, the sound from
the headphone is turned off.
Y Pb(Cb) Pr(Cr) L(MONO)
ALOG PC-AUDIO IN
COMPONENT
R
H/P
DC12V PC-ANALOG
OG PC-AUDIO IN
Headphone
A/V IN
VIDEO L(MONO) R
COMPONENT A/V IN
Y Pb(Cb) Pr(Cr) L(MONO) R VIDEO L(MONO)
PC-AUDIO IN H/P
COMPONENT
Y Pb(Cb) Pr(Cr) L(MONO)
DC12V PC-ANALOG PC-AUDIO IN
A/V IN
COMPONENT
Y Pb(Cb) Pr(Cr) L(MONO) R VIDEO L(MONO) R
H/P
ANT
R ANT
R
ANT
23