Other Functions; Tv, Scart, Video And S-Video Modes; Auto Sleep; Blue Back - LG LT-15AEP Owner's Manual

Other functions

TV, SCART, VIDEO and S-VIDEO modes

(You can't set PC mode in this menu. Use the TV/AV
button)
External equipment inputs: VIDEO or S-VIDEO mode are
used for video devices like VCRs, DVDs, etc.), SCART, is
used for component type devices.
Note : If a VCR is connected to the antenna jack, use TV
mode. See External Equipment Connection section.
1. Press the MENU button.
2. Select the Special menu.
3. Press the CHx x y y button to select Input.
4. Press the VOLÏ Ï q q button to select TV, SCART,
VIDEO and S-VIDEO.
SCART : Device connected to the SCART jack.
VIDEO : VIDEO device connected to the TV's VIDEO Input.
S-VIDEO : S-VIDEO device connected to the TV's S-
VIDEO Input.
PC : PERSONAL COMPUTER connected to the PC socket
of the set
To return to TV mode, press the TV/AV buttons repeatedly.
Alternatively you can select the TV, SCART, VIDEO, S-
VIDEO or PC mode by pressing the TV/AV button.

Auto sleep

If you select Auto sleep On the set will automatically
switch itself to standby mode approximately ten minutes
after a TV Channel stops broadcasting.
1. Repeatedly press the MENU button to select the
Special menu.
2. Press the PRx x y y button to select Auto sleep.
3. Press the VOLÏ Ï q q button to select On.
5. Press the TV/AV button to return to normal TV
viewing.

Blue back

Programme without a program signal appear in blue.
18
Special
Input TV
Auto Sleep Off
Blue back Off
▲▼ ◀▶ MENU%%TV/AV
POWER
SSM PSM
I/II Q.VIEW
MENU TV/AV
PRV
CVOL VOLB
OK
PRW
TEXT/MIX SIZE SLEEP INDEX
UPDATE TIME REVEAL
Other functions

Sleep timer

You don't have to remember to switch the set off before
you go to sleep. The sleep timer automatically switches
the set to standby after the preset time elapses.
Press the SLEEP button to select the number of minutes.
The display will appear on the screen, followed by 0, 10,
20, 30, 60, 90, 120, 180 and 240. The timer begins to
count down from the number of minutes selected.
Note : a. To view the remaining sleep time, press the
SLEEP button once.
b. To cancel the sleep time, repeatedly press the SLEEP
button until the display appears.

Sound output selection

In VIDEO mode, you can select output sound for the left
and right loud-speakers.
Repeatedly press the I/II button to select the sound
output.
L+R : Audio signal from audio L input is sent to left loud-
speaker and audio signal from audio R input is sent
to right loud-speaker.
L+L : Audio signal from audio L input is sent to left and
right loud-speakers.
R+R : Audio signal from audio R input is sent to left and
right loud-speakers.
B
120
POWER
SSM PSM
I/II Q.VIEW
MENU TV/AV
PRV
CVOL VOLB
OK
PRW
TEXT/MIX SIZE SLEEP INDEX
UPDATE TIME REVEAL
19