Nokia 6820 User Manual page 84

• If you have selected
POP3 user name, and
as a server type, then
IMAP4 password are shown. Key in the e-mail server address for incoming
e-mail, then key in the user name and password to access the e-mail
account. If you have not defined an
e-mail server uses the POP3/IMAP4 user name and password instead.
• Other settings and select:
• Include signature. You can define a signature that is automatically
added to the end of your e-mail, when you write your message.
• Use SMTP authorisation. If your e-mail service provider requires
authentication for sending e-mails, select Yes. In this case, you must
also define your
• SMTP user name. Key in the user name for outgoing e-mail that you
have obtained from your e-mail service provider.
• SMTP password. Key in the password that you want to use for outgoing
e-mail.
• Outgoing (SMTP)
outgoing e-mail. The most common default value is 25.
If you have selected
shown:
• Incoming (POP3)
from your e-mail service provider.
Copyright
POP3 as a server type, then
POP3 password are shown. If you have selected
Incoming (IMAP4) server,
SMTP user name
SMTP user name and
port. Key in the number of the e-mail server port for
POP3 as a server type, the following options are
port. Key in the port number that you have obtained
‹
2004 Nokia. All rights reserved.
Incoming (POP3)
IMAP4 user name, and
or SMTP password
SMTP password.
server,
IMAP4
the
84