External A/V Source Setup; Monitor Out Setup / Dvd Setup - LG DU-42PX12X Owner's Manual

Installation
External A/V Source Setup
External A/V Source Setup
How to connect
Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the
figure.
When connecting the TV to external equipment, match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the TV/VIDEO button on
the remote control. (If connected to A/V INPUT 1, select
Video 1 input source).
2. Operate the corresponding external equipment. Refer to
external equipment operating guide.
Monitor Out Setup Monitor Out Setup
MONITOR
COMPONENT 2 DVD
.
OUTPUT
DTV
A/V
INPUT
COMPONENT 1
INPUT 1
RGB INPUT R L
(PC/DTV INPUT)
VIDEO INPUT
AUDIO INPUT
S-VIDEO
IN
(R) AUDIO (L)
DVD Setup
DVD Setup
How to connect
1. Connect the DVD video outputs (Y, P
P , P ) INPUT jacks on the TV and connect the DVD audio outputs
B R
to the AUDIO INPUT jacks on the TV, as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to the S-
VIDEO input on the TV and connect the DVD audio outputs to the
AUDIO INPUT jacks on the TV, as shown in the figure.
NOTE: If your DVD player does not have component video output, use
S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VIDEO or COMP/RGB/DVI button on the remote control
to select Component 1 or Component 2. (If connected to S-
VIDEO, select the Video 1 or Video 2 external input source.)
3. Refer to the DVD player's manual for operating instructions.
• Component Input ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
Component ports
on the TV
Video output ports
on DVD player
14 Plasma TV
Antenna 1
Antenna 2
(MONO)
Analog/DTV DTV
R AUDIO L VIDEO
S-VIDEO
AC INPUT
VIDEO
, P ) to the COMPONENT (Y,
B R
P
Y P
B R
Y Pb Pr
R-Y
Y B-Y
Cr
Y Cb
P
Y P
R
B
MONITOR
COMPONENT 2
DVD
OUTPUT
.
DTV
A/V
COMPONENT 1 INPUT
INPUT 1
B INPUT R L
DTV INPUT)
VIDEO INPUT
AUDIO INPUT
R
The TV has a special signal output capability which allows you to
hook up a second TV or monitor.
Connect the second TV or monitor to the TV's MONITOR OUTPUT.
See the Operating Manual of the second TV or monitor for further
details regarding that device's input settings.
NOTE
• Component, RGB-PC/RGB-DTV, DVI-PC/DVI-DTV, DTV input
sources cannot be used for Monitor out.
DIGITAL AUDIO
(OPTICAL)
RS-232C INPUT REMOTE
DVI COMPONENT1
INPUT OUTPUT
CONTROL
(CONTROL/SERVICE) INPUT
DIGITAL AUDIO
OPTICAL
NOTES
• Digital Audio will not work for Component 2 input source.
• Digital Audio operation has priority if Digital Audio and AUDIO L/R
are connected at the same time.
Antenna 1
Antenna 2
(MONO)
Analog/DTV DTV
AUDIO S-VIDEO
R L VIDEO
AC INPUT
Camcorder
Video Game Set
AUDIO VIDEO
L
MONITOR
COMPONENT 2 DVD
. OUTPUT
DTV
A/V
COMPONENT 1 INPUT
INPUT 1 (MONO)
R L R AUDIO L VIDEO S-VIDEO
AUDIO INPUT VIDEO INPUT
or
or
(R) AUDIO (L)
B R S-VIDEO
DVD
Antenna 1 Ante
Analog/DTV
D
(R) AUDIO (L)