Table of Contents
Advertisement
Press
3.
specific contact in one of the following ways:
•
Scroll through the list using the Up and Down navigation keys.
•
Enter the first few letters to locate the desired Contact. If more than
one Contact appears, scroll through the list using the Up and Down
navigation keys.
4.
To call the Contact, press
To edit the Contact, press the right soft key
Edit. See "Adding New Entries" on page 29.
Selecting Ringer Types to Identify Entries
You can assign ringer types to different Contact entries so you can identify callers
by the ringer you hear when they call.
To assign a ringer to a contact:
1.
Display the edit screen for the Contact. See "Finding, Editing or Dialing
Contacts" on page 29.
Press the navigation key down until Ring is selected and press
2.
3.
Using the navigation keys, select a ringer category and press
Press the navigation key up or down to highlight and listen to the
4.
desired ringer. Press
5.
Press the left soft key
entry.
Selecting Pictures for Entries
You can assign a picture to a Contacts entry so that it appears on the displays
whenever that person phones you.
To assign a picture to a contact:
Display the edit screen for the Contact. See "Finding, Editing or Dialing
1.
Contacts" on page 29.
2.
Press the Up navigation key to select the photo area (if there is no
photo, this area will be labelled Add Photo) and press the right soft key
for Add. (If a photo has already been assigned, the right soft key
will say Change.)
Using the navigation keys, select one of the following options:
3.
•
No Image: Leave the picture blank.
for Find. A list of your Contacts is displayed. You can find a
to select the desired ringer.
for Done to save the changes to the contact
.
for Options, and select
.
.
Contacts 30
Advertisement
Table of Contents
