Moving The Pip Sub Picture; Pop (Picture-Out-Of-Picture: Channel Scan) - LG 50PX4DR Owner's Manual

Operation
Moving the PIP sub picture
Moving the PIP sub picture
In PIP mode, press the D / E / F / G
screen.
Adjusting Main and Sub Picture Sizes for
Adjusting Main and Sub Picture Sizes for
D / E / F / G
Use the button to change main and sub picture sizes in Twin Picture mode.
i.e)
POP (Picture-out-of-Picture: Channel Scan)
POP (Picture-out-of-Picture: Channel Scan)
Use POP to search the programs of all the memorized channels one-by-one on the 3 PIP screen display,
(while the main picture source remains the current channel). The pictures of all the programmed channels
are searched with the 3 POP screens.
Notes:
•Run EZ Scan channel search before using POP mode.
•When Sub pictures are changed from the TV/DTV to CATV/CADTV in POP mode, it may make a noise
from the Tuner switch.
1. Press the PIP button to activate the POP mode while in PIP mode.
• Channel selection: Use
screen to shift it for viewing on the Main screen.
• PIP selection: Use
D / E
• When watching TV/CATV on Main picture, TV/CATV or DTV/CADTV on Sub pictures are in chan-
nel scanning. However, when watching DTV/CADTV on Main picture, only TV/CATV on Sub pic-
ture is in channel scanning.
2. Press the EXIT button to cancel POP mode.
112 Plasma TV
button to move the sub picture to a different location on the
If screen is adjusted to the
maximal size, the large
screen is filled with entire
screen vertically as shown.
F
button to enlarge the selected channel being searched on the PIP
button to select one of 3 PIP screen pictures in POP mode.
T win Picture
T win Picture
D
F TV
2-0
E
TV
4-0
TV
6-0