2.12 Laser Unit (429), Feed Roller (618), Paper Feed Roller (746), Clutch Gear
Assembly (660), Paper Feed Solenoid (744), Fan Unit (622)
(4)
(5)
(3)
(2)
(6)
(7)
(8)
(9)
(1) Remove the Front Cover (105), Rear Cover
(108)
(Refer to 2.3)
, Control Panel Unit
(Refer to 2.4)
Motor Bracket and Gear Assembly
.
2.11)
(2) Disconnect Connectors.
(3) 2 Screws (19).
(4) Remove the Laser Unit (429).
(5) Remove the E34 Drive Gear (620).
Note:
When reassembling, apply KS-660 Conductive
Grease to the end of the Feed Roller Shaft (618).
(6) 2 Screws (19).
(7) Remove the Feed Roller (618).
(8) 2 Screws (19).
(9) Remove the Paper Feed Roller Assembly.
42
, Paper Guide Cover (110)
(Refer to 2.5)
(Refer to
, and