Vcr Setup / Cable Tv Setup - LG 42PX3DBV Owner's Manual

Installation
NOTE: All cables shown are not included with the TV
VCR Setup
VCR Setup
- To avoid picture noise (interference), leave an adequate distance between the VCR and TV
- Use the ISM Method (on the Option menu) feature to avoid having a fixed image remain on the screen for a long period of time.
Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may
remain visible on the screen.
Connection Option 1
Set VCR output switch to 3 or 4 and then tune
TV to the same channel number.
Connection Option 2
1. Connect the audio and video cables from the
VCR's output jacks to the TV input jacks, as
shown in the figure.
When connecting the TV to a VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect the S-VIDEO output from a VCR
to the S-VIDEO input, the picture quality is
improved; compared to connecting the Video
input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)
3. Select the input source by using the TV/VIDEO
button on the remote control. (If connected to
A/V INPUT 1, select Video 1 input source)
Do not connect to both Video and
S-Video at the same time.
Cable TV Setup
Cable TV Setup
- After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
The TV cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the TV.
- For further information regarding cable TV service, contact your local cable TV service provider(s).
Connection Option 1
1. Select 3 or 4 with channel switch on the cable
box.
2. Tune the TV channel to the same selected
output channel on cable box.
3. Select channels at the cable box or with the
cable box remote control.
Connection Option 2
1. Connect the audio and video cables from the
Cable Box's output jacks to the TV input jacks,
as shown in the figure.
When connecting the TV to a Cable Box,
match the jack colors (Video = yellow, Audio
Left = white, and Audio Right = red).
2. Select the input source by using the
TV/VIDEO button on the remote control. (If
connected to A/V INPUT 1, select Video 1
input source)
3. Select your desired channel with the remote
control for cable box.
14 Plasma TV
RGB INPUT
DVI INPUT R
TPUT AUDIO INPUT (PC/DTV INPUT)
(PC/DTV INPUT)
AUDIO INPUT
1
ANT OUT
ANT IN
COMPONENT 2
COMPONENT 1
RGB INPUT R L
IO INPUT
(PC/DTV INPUT)
VIDEO INPUT
AUDIO INPUT
COMPONENT 2
DVD
/DTV
INPUT
A/V
COMPONENT 1
INPUT 1
(MONO)
R L S-VIDEO
L VIDEO
VIDEO INPUT AUDIO
2
S-VIDEO
OUT
VCR
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
3 4
IN
DVD
/DTV
INPUT A/V
INPUT 1 Antenna
(MONO)
Analog/DTV
R L VIDEO S-VIDEO
AUDIO
1
2
(R) AUDIO (L) VIDEO
OUTPUT
SWITCH
TV
3 4
VCR
RF Cable
Cable Box
Antenna
Analog/DTV
AC INPUT
AC INPUT