Locations And Functions Of Parts; Accessory Attachments - Sony HDC3300R Operation Manual

Locations and Functions of Parts

Accessory Attachments

l Shoulder pad
a VF (viewfinder) connector (20-pin)
Connect the cable of the viewfinder (not supplied).
b Shoulder strap fitting post
Attach one end of a shoulder strap (not supplied) to this
fitting post, and the other end to the fitting post on the other
side of the camera.
c Accessory shoe
To attach an accessory using a 1/4-inch screw.
d Viewfinder left-right positioning ring
Loosen this ring to adjust the viewfinder position towards
the left or right.
e Viewfinder front-rear positioning lever and lock
knob
Loosen the lever and knob to adjust the viewfinder position
towards the front or rear.
S E R
IE S
a VF connector
b Shoulder strap fitting post
c Accessory shoe
d Viewfinder left-right positioning
ring
e Viewfinder front-rear positioning
lever and lock knob
f Lens cable clamp
g Lens fixing lever
h Lens mount cap
i Lens mount
j LENS connector
k Tripod mount (bottom)
For details on adjusting the viewfinder position, see
"Attaching a Viewfinder" on page 16.
f Lens cable clamp
To secure the cable of the lens (not supplied).
g Lens fixing lever
To secure the lens in the lens mount.
h Lens mount cap
The cover can be removed by moving the lens fixing lever
upward. Keep the lens mount covered with this cap when
a lens is not attached.
i Lens mount
To attach a lens (not supplied).
Locations and Functions of Parts
7