Table of Contents
Advertisement
Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the network
to transmit an encrypted security code called an Access or
Information
is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified
length you were asked to enter when you set up security for your wireless network. If you use this
method of setting up the network connection, and have a
network, you will have to enter the Pass Phrase during the the automatic or manual setup process.
How to set up automatically
1
Network Type
Wireless
Set
to
from the
2
The
Network
function searches for available wireless networks. When done, it displays a list of the
available networks.
3
In the list of networks, press the ▲ or ▼ button to select a network, and then press the E button
twice.
― If the desired wireless router does not appear, select
― If the router cannot be found after retrying, select the
Add Network
The
button appears.
Add Network
Select
to add a wireless router to connect to.
4
Enter password.
If the
screen appears, go to step 5. If you select a wireless router that does not
have security, go to step 7.
5
If the router has security, enter the
Enter password.
Connection
Information. The
Connection Information
for your wireless
Network Settings
page.
Refresh
to search again.
Stop
button.
(Security key or PIN).
6
When done, use the right arrow button to move the cursor to Done, and then press E. The
network connection screen appears and the verification process starts.
Connection
― A connection with the router is established, but the Internet cannot be accessed.
7
When the connection has been verified, the
are setup and ready to
Manual Network Setup (Wireless)
Offices may use static IP addresses.
If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server
address. Enter these values manually.
Getting the Network Connection Values
To view the Network connection values on most Windows computers, follow these steps.
1
Right click the Network icon on the bottom right of the screen.
2
In the pop-up menu that appears, click Status.
3
On the dialog that appears, click the Support tab.
4
On the Support Tab, click the Details button. The Network connection values are displayed.
"Your wireless network and Internet connection
use." message appears.
Advertisement
Table of Contents
Troubleshooting
