System - D-Link DCS-5020L User Manual

Section 3 - Configuration
This section allows you to save and restore your configuration, restore the factory settings, and/or restart the camera.
Save To Local Click the Save Configuration button to save the current camera
Hard Drive:
configuration to your local PC.
Load From To load a previously saved configuration, click the Browse... button, select
Local Hard your saved configuration file, then click the Restore Configuration From
Drive: File button.
Restore Click the Restore Factory Defaults button to reset all settings back to
To Factory
the factory defaults. Please note that this will erase any changes you have
Default:
made to the settings of the camera.
Reboot The Click the Reboot the Device button to reboot the camera.
Device:
D-Link DCS-5020L User Manual

System

43 43