Connecting the Linksys Router
2
Connecting the Linksys router
Make sure you have a LAN cable connected from the HKBN wall plate/ONT to the Internet
port of your Linksys Router (EA6900). Using a second LAN cable, connect it from the Router
LAN port to the computer LAN port. Once finished, switch on the power supply for the router
and turn on the computer.
Open your Internet browser, and input [http://192.168.1.1] into the address-bar then press
[Enter]. Linksys Smart Wi-Fi Setup will start automatically, choose [I have read and accepted
the License Terms for using this software], click [Next]
3
HKBN_SETUP_ROUTER_LINKSYS_ENG_230315