Advertisement
BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August '03 ~ 5596
At a glance
One-Touch memory buttons
Quickdial button
(M1, M2, M3)
Allows you to dial up to ten numbers
Allows you to store and
stored in the Quickdial memory at the
automatically dial up to three
touch of two buttons.
numbers at the touch of one
button.
Call indicator light
Flashes to indicate an incoming call.
Also flashes when storing numbers,
using secrecy or setting the ringer.
BT Decor 110
Store button
Use to store numbers in the memory
and to change the ringer and pitch
Quickdial
volume.
1
2
3
4
5
Recall button
6
Store
7
8
For use with a switchboard/PBX and
9
R
BT Calling Features. Please contact
0
S
your switchboard supplier for more
Redial
information. For more information on
BT's Calling Features please call
Freefone 0800 800152
Redial/Pause button
Secrecy button
Redials the last number called.
Lets you talk to someone in the same
Also, press to enter a pause when
room without the person you are
storing a number in the memory.
calling hearing you.
Handset hook
Keeps the handset in place when the
BT Decor 110 is wall mounted.
See back page for more information.
Revolve the handset catch on the
base unit. The handset will now be
able to rest on the hook when
wall-mounted.
Safety information
General
We recommend that you do not place the
product on antique/veneered wood to
Simply clean your BT Decor 110 with a
avoid damage.
damp (not wet) cloth, or an anti-static
wipe. Never use household polish as this
Do not stand your product on carpets or
may damage the product. Never use a
other surfaces which generate fibres, or
dry cloth as this may cause static shock.
place it in locations preventing free flow
of air over its surfaces.
Do not open the BT Decor 110. This
could expose you to high voltages or
Do not submerge any part of your
other risks.
product in water and do not use it in damp
or humid conditions, such as in bathrooms.
Environmental
Do not expose your product to fire,
Do not expose to direct sunlight.
explosive or other hazardous conditions.
BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August '03 ~ 5596
Setting up
Plan the location of your
1. Plug your BT Decor 110
BT Decor 110.
into the telephone socket.
Situate your BT Decor 110 close
enough to a phone socket so that
the line cord will reach.
You can wall-mount your product,
Your BT Decor 110 is now ready
for use.
see back page.
Using the telephone
You can now talk to someone in
Making and ending calls
the room without your caller
hearing you.
To make a call
Press and release the SECRECY
Lift the handset and wait for the
button again to return to your
dial tone.
caller.
Dial the telephone number.
To adjust the ringer volume
To end a call
There are 3 volume settings to
Replace the handset.
choose from: HIGH, LOW or OFF.
The default setting is HIGH.
To receive a call
Lift the handset and press the
When the telephone rings the call
STORE button. The call indicator
indicator light will also flash to
light will flash.
indicate that there is an incoming
call. Simply pick up the handset.
Press the
To redial the last number
Press either, 1 for HIGH, 2 for
called
LOW or 3 for OFF.
Lift the handset.
Press the STORE button.
Press the REDIAL button.
You will hear a confirmation tone.
The last number called is dialled.
Replace the handset.
A redial number can be no longer
(If the ringer is set to OFF, the call
than 32 digits.
indicator light will still flash to
indicate someone is calling you.)
Note
To set the ringer pitch
During all storing operations the
call indicator light will flash.
The ringer pitch can be set to
High or Low. The default setting
is High.
Secrecy
Lift the handset and press the
When on a call you can talk to
STORE button. The call indicator
someone in the same room,
light will flash.
without your caller hearing.
Press the
To switch secrecy on and off
Press either, 1 for HIGH or 2 for
During a call press and release the
LOW.
SECRECY button.
Press the STORE button.
The call indicator light will flash to
show that secrecy is on.
You will hear a confirmation tone.
Your caller will be put on hold.
Replace the handset.
BT Decor 110 ~ Issue 2 ~ 1st Edition ~ 27th August '03 ~ 5596
One-Touch memories
You can store your three most
frequently used telephone numbers
in the One-Touch memories
(M1, M2 or M3). Please note that
the number can be no longer than
18 digits.
To store a One-Touch number
Lift the handset.
Press the STORE button. The call
indicator light will flash.
Press the memory location number,
(M1
,
M2
,
M3), under which you
want to store the number.
Enter the telephone number you
want to store including the area
code if applicable.
Press the STORE button.
You will hear a confirmation tone.
Replace the handset.
Note
Whilst storing a number in the
memory you can cancel the
operation by replacing the handset
on the cradle.
button.
To dial a One-Touch number
Lift the handset and wait for the
dial tone.
Press the memory location
number, (M1
,
M2
which the number is stored.
The number is dialled
automatically.
To insert a pause in a memory
number
Sometimes you may need to enter
a pause when storing a number,
e.g. with an overseas number you
may need to enter a pause after
storing the international code.
Press the REDIAL button in the
place where you want to enter a
#
button.
pause.
When you dial the number your
BT Decor 110 will automatically
insert the pause where you
stored it.
Quickdial memories
You can store a further 10 telephone
numbers in the Quickdial memories.
Please note that the numbers can
be no longer than 18 digits long.
To store a number in the
Quickdial memory
Lift the handset.
Press the STORE button.
The call indicator light will flash.
Press the memory location
number between 0 and 9 under
which you want to store the
number.
Enter the telephone number you
want to store including the area
code if applicable.
Press the STORE button.
You will hear a confirmation tone.
Replace the handset.
Note
There is a quickdial memory
label on your telephone. Lift the
plastic plate up and you can
write on the label to keep a
record of which memory location
number you have used for each
telephone number.
To dial a number in the
Quickdial memory
,
M3), under
Lift the handset and wait for the
dial tone.
Press the QUICKDIAL button.
Press the memory location
number between 0 and 9, under
which the number is stored.
The number is dialled automatically.
Advertisement
