DVD PLAYER OWNER’S MANUAL MODEL : DVD-3350E Before connecting, operating or adjusting this product, please read this instruction booklet carefully and completely. FOR THE GUARANTEE TERMS & CONDITIONS, PLEASE REFER TO BACK COVER OF THIS MANUAL.
13 or 5 amp BS 1362, BSI or ASTA approved type. Never use this plug with the fuse cover omitted. To obtain a replacement fuse cover contact your dealer or “LG Electronics U.K.Ltd.” If the type of plug supplied is not suitable for the mains sockets in your home, then the plug should be removed and a suitable type fitted.
When the DVD player is not in use, be sure to remove the disc and turn off the power. If you do not use the DVD player for a long period, the unit may not function properly in the future. Turn on and use the DVD player occasionally.
About This Owner’s Manual This owner’s manual explains the basic instructions of this DVD player. Some DVD video discs have functions that may not be explained in this owner’s manual. Therefore, some instructions may differ from this owner’s manual, and there may be extra...
PAGE 6 INTRODUCTION Identification of Controls Front Panel POWER indicator (Power ON mode: Green color, Standby mode: Red color) POWER STANDBY Display window POWER button Display Window Operating status indicator CD indicator MP3 indicator Angle icon indicator SELECT/ENTER button Disc tray STOP button PAUSE/STEP button PLAY button...
Identification of Controls Rear Panel COAXIAL DIGITAL AUDIO OUT jack EXTERNAL INPUT (SCART) jack EXTERNAL DIGITAL TO TV OPTICAL OPTICAL DIGITAL AUDIO OUT jack Remove the dust protection cap from the connector and connect the optical digital cable (not supplied) firmly so that the configurations of both the cable and the connector match.
PAGE 8 INTRODUCTION Identification of Controls (con’d) REMOTE CONTROL You will find instructions for each of the remote control functions in the appropriate sections of this instruction manual. POWER button PLAY button REV SKIP button PAUSE/STEP button SELECT/ENTER button SETUP button GUI DISPLAY button NUMBER buttons CLEAR button...
Do not expose the remote sensor of the DVD player to a strong light source such as direct sunlight or illumination. If you do so, you may not be able to operate the DVD player with the remote control. Notes on the remote control Direct the remote control at the remote sensor of the DVD player.
Notes Refer to the owner’s manual of your TV as well. When you connect the DVD player to your TV, be sure to turn off the power and unplug both units from the wall outlet before making any connections. Connect the DVD player to your TV directly. If you connect the DVD player to a VCR, the playback picture will be distorted because DVD video discs are copy protected.
Warning Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers.
Refer to the owner’s manual of your audio equipment as well. When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
Connecting to Optional Audio System Enjoying Dolby Digital (5.1 CH) Sound Dolby Digital Surround (5.1 CH) Dolby Digital is a six-channel digital surround sound technology developed by Dolby Laboratories for theatre-like surround sound reproduction. DVDs supporting Dolby Digital technology feature the surround sound from DVD movie or music disc featuring this logo.
Warning Do not set the Digital Audio Output of this DVD player to “Dolby Digital” unless you are connecting the DIGITAL OUT jack of this DVD player to an AV decoder that has the Dolby Digital decoding function. High volume sound may damage your hearing as well as the speakers.
Refer to the owner’s manual of your receiver as well. When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
If you insert an audio CD, the CD indicator lights up in the DVD display. The title number does not appear. After playing back all of the chapters in the title, the DVD player automatically stops and returns to the menu screen.
Page 17
Use the OPEN/CLOSE button on the remote control or DVD player to open and close the disc tray. Do not push the disc tray while it is moving. Doing so may cause the DVD player to malfunction. Do not push up the disc tray or put any objects other than discs on the disc tray.
PAGE 18 BASIC OPERATION Basic Playback POWER PLAY REV SKIP SKIP SKIP STOP STOP PAUSE/ PAUSE SELECT /STEP /ENTER OPEN/CLOSE STEP SETUP GUI DISPLAY RETURN 3D SOUND PROGRAM CLEAR TITLE MENU AUDIO SUBTITLE ANGLE MARKER-SEARCH REPEAT RANDOM ZOOM SLOW/SCAN Stopping Play Press STOP during playback.
The DVD player provides four (4) scan speeds for DVD movie play. Only two (2) scan speeds are available during Audio CD play. The DVD player does not play back in slow-motion in case of audio CD. PAGE 19 1/16...
PAGE 20 OPERATION USING GUI MENU ICONS General Information about GUI menu icons This unit features GUI Menu Icons showing disc information (title/chapter/track number, elapsed playing time, audio/subtitle language, angle, and sound) and player information (repeat play, play mode, marker, etc.).
Detailed description of each GUI menu icon You can view information about a disc and its operational status on the TV screen. Press GUI DISPLAY during playback. [TV screen] DVD GUI To show the current title No. and to jump to the desired title No. To show the current chapter No.
PAGE 22 ADVANCED OPERATION Using a title menu Some movie discs may contain two or more titles. If the disc has a title menu recorded on it, the TITLE button can be used to select the movie title. (The details of operation differ depending on the disc used.) Selecting a title may not be possible on certain DVD discs.
Memorizing Settings for Viewed DVDs (Condition Memory) This unit stores, in memory, settings for DVDs you have watched. Settings remain in memory even if you remove the disc from the player, or switch power to the player OFF. If you load a disc that has its settings memorized, the “Resume disc from last position?”...
PAGE 24 ADVANCED OPERATION Changing subtitle language It is possible to change the subtitle language to a different language from the one selected at the initial settings. (See page 33 for further info.) This operation works only with discs on which multiple subtitle languages are recorded.
Viewing from another angle Some DVDs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button. (The recorded angles differ depending on the disc used.) AUDIO SUBTITLE ANGLE MARKER-SEARCH...
PAGE 26 ADVANCED OPERATION Repeat Play Repeating viewing (listening) Press REPEAT during playback. Each time this button is pressed, the TV screen changes as shown below and the disc will repeat a chapter or title (DVD) or a track (CD). •...
Storing markers in memory to be viewed (listened to) again Storing a MARKER in the DVD memory is similar to marking your page in a book. It allows you to quickly return to any point on the disc. POWER PLAY SKIP SKIP STOP...
CD discs. Random does not work with DVD movies. You can playback titles, or tracks in random order. (Random playback) The DVD player automatically selects the titles in a DVD video karaoke disc only and plays them back randomly. PROGRAM...
Program play The player plays the tracks on the disc in an order you specify. Note: Program play function is possible only with audio CDs. It does not work with DVD movie discs. POWER PLAY SKIP SKIP STOP PAUSE SELECT /STEP /ENTER OPEN/CLOSE...
PAGE 30 ADVANCED OPERATION Playback with MP3 POWER PLAY SKIP SKIP STOP 2, 3, PAUSE SELECT /STEP /ENTER OPEN/CLOSE SETUP GUI DISPLAY RETURN 3D SOUND PROGRAM CLEAR TITLE MENU AUDIO SUBTITLE ANGLE MARKER-SEARCH REPEAT RANDOM ZOOM To play an MP3 file repeatedly If you press REPEAT button once during play, the current MP3 file will play repeatedly.
Page 31
Playback with MP3 POWER PLAY SKIP SKIP STOP PAUSE SELECT /STEP /ENTER OPEN/CLOSE SETUP GUI DISPLAY RETURN 3D SOUND PROGRAM CLEAR TITLE MENU AUDIO SUBTITLE ANGLE MARKER-SEARCH REPEAT RANDOM ZOOM To play an MP3 file repeatedly If you press REPEAT button once during play, the current MP3 file will play repeatedly.
PAGE 32 INITIAL SETTINGS Common procedures of initial settings Once the initial settings have been completed, the player can always be operated under the same conditions (especially with DVD discs). The settings will be retained in the memory until they are changed, even if the power is switched off.
Selecting disc languages This is to select the audio soundtrack language, subtitle language and the language used in title menus or DVD menus which will always be used for every disc to be played back. When you play back a DVD video disc, the DVD player automatically displays the pre-selected subtitle language if it is included on the disc.
DVDs with ratings higher than your selection will be blocked, unless the correct password is entered again. For example: if you change the level to “5”, the DVD player will not play discs with ratings of “6”, “7” or “8” unless the correct password is entered on the remote control.
Selecting rating level and password POWER PLAY SKIP SKIP STOP 2, 3 PAUSE SELECT /STEP /ENTER OPEN/CLOSE SETUP GUI DISPLAY RETURN 2, 3 3D SOUND PROGRAM CLEAR TITLE MENU AUDIO SUBTITLE ANGLE MARKER-SEARCH REPEAT RANDOM ZOOM SLOW/SCAN To clear your 4-digit password If you forget your password, to clear the current password, follow the procedure below.
PAGE 36 INITIAL SETTINGS Selecting TV Aspect Select the appropriate screen type according to your TV set; conventional size screen (4:3) or wide-screen (16:9). POWER PLAY SKIP SKIP STOP PAUSE SELECT /STEP /ENTER OPEN/CLOSE SETUP GUI DISPLAY RETURN 3D SOUND PROGRAM CLEAR TITLE...
Selecting Menu Language Selects language for DVD menus and displays on the TV. POWER PLAY SKIP SKIP STOP PAUSE SELECT /STEP /ENTER OPEN/CLOSE SETUP GUI DISPLAY RETURN 3D SOUND PROGRAM CLEAR TITLE MENU Selecting TV Output It can be used to select the video output between S-VIDEO OUT and SCART’s RGB signal (component).
PAGE 38 INITIAL SETTINGS Selecting Pseudo PAL Depending on a disc, you can play a NTSC DVD disc by Pseudo PAL ON mode. POWER PLAY SKIP SKIP STOP PAUSE SELECT /STEP /ENTER OPEN/CLOSE SETUP GUI DISPLAY RETURN 3D SOUND PROGRAM CLEAR TITLE MENU...
Selecting Digital Audio Output Each DVD disc has a variety of audio output options. Set the player’s Digital Audio Output according to the type of audio system you use. POWER PLAY SKIP SKIP STOP PAUSE SELECT /STEP /ENTER OPEN/CLOSE SETUP GUI DISPLAY RETURN 3D SOUND...
PAGE 40 INITIAL SETTINGS Selecting Speaker Select the speaker to adjust the audio output mode of the speaker. STOP 1, 2 PAUSE SELECT /STEP /ENTER OPEN/CLOSE SETUP GUI DISPLAY RETURN 3D SOUND PROGRAM CLEAR TITLE MENU Note Do not place the centre or rear speakers farther away from the listening position than the front speakers.
Table of Language and Their Abbreviations Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and/or “Menu” (See page 33). Code Language Code 6565 Afar 7079 Faroese 6566 Abkhazian 7082 French 6570 Afrikaans 7089 Frisian 6577 Ameharic 7165 Irish 6582 Arabic...
You can play back CD-R and CD-RW disc also. You cannot playback discs other than those listed above. (Video CD, CD-ROM, CD-Extra, CD-G, photo CD, and CD-i discs can not be played on this DVD player.) “Certain audio features of this product manufactured under a license from Desper Products, Inc., Spatializer®...
• A menu is on the TV screen. • The Rating level is set. • The remote control is not pointed at the The remote control remote sensor of the DVD player. does not work properly. • The remote control is too far from the DVD player.
PAGE 44 REFERENCE Specifications DVD player/Outputs/Supplied Accessories Power supply Power consumption Mass External dimensions (W X H X D) Signal system Laser Frequency range (audio) Signal-to-noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Wow and flutter Operating conditions Video output...
Page 48
2. The dealer (or his service agent) who sold the product will be reimbursed for any labour provided in the repair of this LG equipment, for a period of 12 months from the original date of purchase. These claims must be made in accordance with the published scale of service charges and relevant claims procedure.