Wireless Client - Buffalo Nfiniti High Power WZR-HP-G300NH User Manual

 Enter a name for your wireless network into "Wireless Network Name
(SSID)".
 Click "Save".
Wireless -> Wireless Security
 Choose and configure your desired security mode.
WEP is insecure and should only be used if no other option is
available.
 Click "Apply Settings"
You can now connect the router to the Internet and your local network.
If you're running a DHCP server in your LAN, connected wireless
devices will get their IP addresses from the server.

3.2. Wireless Client

The router can be also used as a wireless LAN client. This can be
useful if you want to connect devices to your wireless LAN that do not
have a wireless LAN interface. In this configuration, the wireless LAN
interface acts as a wireless client.
can also access the WAN through the wireless connection.
Setup -> Basic Setup
 WAN Setup
o Set "Connection Type" to "DHCP" to have the AirStation get its IP
address from a DHCP server, or to a "Static IP" if no DHCP server
is available.
 Network Setup
o Enter the desired LAN-side IP address for the router in "Router
IP".
o Set the "DHCP Type" to "DHCP Server" (this is the default setting).
o "Enable" "DHCP Server" (this is the default setting).
o Adjust the DHCP address range to match your requirements.
Attached wired Ethernet devices
- 20 -
Please note that