Bonnet And Tape Mechanism; Disassembly Of Front Panel Path - Pioneer CT-730 Service Manual

2 .
3 .
4 .
Bonnet and Tape Mechanism
1. Unscrew the four screws Q
holding the Bon-
net on and remove the Bonnet by sliding it
toward the rear.
Unscrew the sub-panql screw @ and gently
press down on hook G) with a screwdriver so
the sub-panel can be pulled loose.
Unscrew the two sub-panel base screws O
and remove the sub-panel base. The eject,
stand-by and power knobs can now be re-
moved.
Remove the REC VR knob and the two screws
below @ and gently press down on hook @
with a screwdriver so the front panel can be
pulled loose.
5. Unscrew the front panel base screws €l and
remove the front panel base.
6. Remove the mechanism assembly by removing
the door assembly and unscrewing screws
@
7 . Remove the panel stay by unscrewing screws
O
, removing the connecting plate and
unscrewing screws @
Front Panel
1. Remove the meter assembly by removing
rivet O
2. Remove the counter by unscrewing screw
0
3. Remove the control assembly by removing
rivets O
Panel stay
Fig.5-2
Disassembly of front panel path