Sony Rolly SEP-30BT Operating Instructions Manual page 28

Troubleshooting
(continued)
Bluetooth communication
Symptom
The sound of the connected
Bluetooth device is not heard.
Noise is generated.
Pairing cannot be done.
The sound is heard intermittently.
Downloaded from ManualMPlayer.com Manuals

Cause/Remedy
The sound is silenced on the paired Bluetooth device.

Turn up the volume on the paired Bluetooth device.

The volume may be set to the minimum.

 Adjust the volume ( page 30).

 Noise may be generated depending on the environment
in which the connection with the Bluetooth device was
established.
Try establishing the connection with the Bluetooth

device again.
The player is too far from the Bluetooth device to be

paired.
 Place the player and the Bluetooth device closer and
perform the pairing operation.
Make sure that the paired Bluetooth device supports the

A2DP profile.
There are obstacles (metal objects, persons, walls, etc.)

between the player and the paired Bluetooth device.
Avoid or remove the obstacles.

If there is equipment that generates electromagnetic

radiation, such as a wireless LAN, other Bluetooth device,
or a microwave oven nearby, move them away.
If Bluetooth devices other than the player are connected

to the paired Bluetooth device, the music played on the
Bluetooth device may sound intermittently through the
speakers of the player. If this happens, disconnect the
other Bluetooth devices from the paired Bluetooth device.
Symptom Cause/Remedy
A connection cannot be established. The Bluetooth device to be connected does not support

the SCMS-T system.

Others
Symptom Cause/Remedy
The arm was detached. Attach the arm as described on page 11.

The wheel was detached Attach the wheel as described on page 11.

On the [Tools] menu of Rolly Choreographer, select
[Rolly Settings] - [Bluetooth Communication]
- [Copyright Protection] - [Copyright Protection]
- [Disable SCMS-T method content protection].