D-Link DSL-322T User Manual page 9

3. Click Install to begin the installation.
4. Click Finish to complete the InstallShield wizard.
When the USB driver has been installed, insert one end of the USB cable included with the Modem into the DSL-322T
Modem's USB port. Insert the other end of the USB cable into a USB port on your PC. Connect the power adapter to
the power input at the back panel of the DSL-322T and then plug the other end of the power adapter to a wall outlet or
power strip. On the front of the device, the Power LED will turn ON to indicate proper operation. Insert the telephone
cable included with the Modem into the ADSL port, and then connect the cable to your telephone line. Check the LED
display on the front of the Modem to confirm that the connections have been made.
DSL-322T ADSL Modem User Guide
ix