LG MT-50PZ40, MT-50PZ41, MT-50PZ43S, MZ-50PZ42, MZ-50PZ43 Owner's Manual page 26

11. Sharpness (Command:k)
G To adjust the screen sharpness.
You can also adjust sharpness in the video menu.
Transmission
[k][k][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping1' (See p.28).
Acknowledgement
[k][ ][Set ID][ ][OK][Data][x]
Data Min : 0 ~ Max : 64
12. OSD select (Command:l)
G To select OSD (On Screen Display) on/off.
Transmission
[k][l][ ][Set ID][ ][Data][Cr]
Data 0 : OSD off
Acknowledgement
[l][ ][Set ID][ ][OK][Data][x]
Data 0 : OSD off
13. Remote control lock mode (Command:m)
G To lock the front panel controls on the monitor and remote
control.
Transmission
[k][m][ ][Set ID][ ][Data][Cr]
Data 0 : Lock off
Acknowledgement
[m][ ][Set ID][ ][OK][Data][x]
Data 0 : Lock off
* If you're not use the remote control, set this mode.
When main power is on/off, remote control lock is released.
14. PIP / Twin (Command:n)
G To control the PIP (Picture In picture).
You can also control the PIP/DW using the PIP or Twin pic-
ture button on the remote control or in the Special menu.
Transmission
[k][n][ ][Set ID][ ][Data][Cr]
Data 0 : PIP/DW off
1 : PIP
Acknowledgement
[n][ ][Set ID][ ][OK][Data][x]
Data 0 : PIP/DW off
1 : PIP
26
1 : OSD on
1 : OSD on
1 : Lock on
1 : Lock on
2 : DW1
3 : DW2
2 : DW1
3 : DW2
15. PIP Size (Command:o)
G To select the PIP picture format.
You can also select the PIP picture format using the
WIN.SIZE on the remote control.
Transmission
[k][o][ ][Set ID][ ][Data][Cr]
Data 0 : 4:3
Acknowledgement
[o][ ][Set ID][ ][OK][Data][x]
Data 0 : 4:3
16. PIP position (Command:q)
G To select sub picture position for PIP.
You can also adjust the sub picture position using the
WIN.POSITION on the remote control or in the Special menu.
Transmission
[k][q][ ][Set ID][ ][Data][Cr]
Data 0 : Right down on screen
1 : Left down on screen
2 : Left up on screen
3 : Right up on screen
Acknowledgement
[q][ ][Set ID][ ][OK][Data][x]
Data 0 : Right down on screen
1 : Left down on screen
2 : Left up on screen
3 : Right up on screen
17. Treble (Command:r)
G To adjust treble.
You can also adjust treble in the audio menu.
Transmission
[k][r][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping1' (See p.28).
Acknowledgement
[r][ ][Set ID][ ][OK][Data][x]
Data Min : 0 ~ Max : 64
18. Bass (Command:s)
G To adjust bass.
You can also adjust bass in the audio menu.
Transmission
[k][s][ ][Set ID][ ][Data][Cr]
Data Min : 0 ~ Max : 64
* Refer to 'Real data mapping1' (See p.28).
Acknowledgement
[s][ ][Set ID][ ][OK][Data][x]
Data Min : 0 ~ Max : 64
1 : 16:9
1 : 16:9