Displaying Disc Information; Using The Sacd Setup - Pioneer X-Z9 Operating Instructions Manual

Playing SACD/CD discs
4 To play the program list, press
Program play remains active (PGM shows in the display)
until you stop playback (press
start normal playback).
• Press PROGRAM then
play.
• To add more tracks to the program list, repeat steps
1 and 2.
• When the disc is stopped, press PROGRAM then
CLEAR to erase one track at a time (from the end of
the list), or simply press CLEAR to erase all tracks.

Displaying disc information

Various track information, such as the elapsed and
remaining playing time can be displayed while a disc is
1
playing.
• To switch the information displayed, press DISPLAY
repeatedly.

Using the SACD Setup

Hybrid SACD discs include a conventional CD layer
along with the high-resolution SACD layer, so it is
necessary to indicate to the player which layer you want
to listen to. Use the SACD Setup to do this.
• When the disc is stopped, press SACD/CD to switch
between the CD area and the SACD area of a hybrid
disc.
Note
1 With data discs, MP3/WMA filenames are displayed (up to 25 characters). Note that some characters may not display correctly.
2 Note that this unit is not compatible with dual-layer or multichannel SACD discs.
(play).
(play) after (stop) to
(play) to restart program
2
04
17
En