Table of Contents
Advertisement
Quick Links
Bellingham 4.7kW Multifuel Inset Stove
For Standard 16" Fireplace Opening
Please hand these instructions to the stove user when installation is complete.
Leave the system ready for operation and instruct the user in the correct use of the
appliance and operation of controls.
Installation should only be carried out by a suitably qualified installer.
Dimplex recommend using an installer who is registered with HETAS (UK) or with INFO
(Republic of Ireland). Installation must comply with all current Building Regulations.
08/52386/0 - Issue 4
25 Nov 2014
The product complies with the European Safety Standards EN13229 for Room heaters fired by solid fuel.
Advertisement
Table of Contents
Related Manuals for Dimplex Bellingham BLM4iSE
Summary of Contents for Dimplex Bellingham BLM4iSE
- Page 1 Installation should only be carried out by a suitably qualified installer. Dimplex recommend using an installer who is registered with HETAS (UK) or with INFO (Republic of Ireland). Installation must comply with all current Building Regulations.
- Page 2 - 2 - 45˚ L (Dia) Table 1 - Dimensions Bellingham Inset 4.7kw 600 Note: All Dimensions in mm. Dimensions stated may be subject to a slight ± variation. ( 25.4mm = 1”) Bellingham Inset BLM4iSE Table 2 - Technical Specification Wood Solid Fuel Nominal heat output...
- Page 3 - 3 -...
-
Page 4: Typical Installation
- 4 - Typical installation non combustible wall Fireplace Opening min thick Y 400mm (16”) Lintel or Gather Clay Flue pipe Fireback to fireback and BS1251 insulated infill Change in flooring level to distinguish hearth CONSTRUCTIONAL HEARTH min 225mm NON COMBUSTIBLE 125mm THICK MINIMUM Constructional Hearth min 125mm thick... -
Page 5: Important Safety Advice
- 5 - Bellingham 4.7kW Multifuel Inset Stove (BLM4iSE) IMPORTANT: THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE Health and Safety Precautions Important Safety Advice Handling: This product is heavy and should be handled with care to avoid the possibility of personal injury when moving or servicing. Please read these instructions carefully before installing Adequate facilities must be available for the unloading and handling or using this appliance. - Page 6 - 6 - contact with the fascia. Place hand through the stove collar Table 3 and tighten the wingnut on the clamping bar (7, Fig 7). The Stove distance X Min Wall Min solid wall height clamp creates pressure when it contacts the chimney/lintel. from wall Thickness Y 3 0 0 m m a b o v e t h e...
-
Page 7: Operating Instructions
- 7 - Commissioning alight. Once the fuel is well alight the primary air may be adjusted to control the fire to the desired heat setting. Upon completion of installation, the stove and flue system should be tested by a suitably qualified person to make sure it is safe for Do not operate the stove with both air supplies open for normal use. -
Page 8: Troubleshooting
- 8 - De-Ashing Glass Panels: Clean the glass panels when cool with a proprietary glass cleaner or some damp newspaper. Do not use abrasive This insert stove is fitted with a removable log bar and grate. It materials as these can scratch the glass and make subsequent is important to de-ash the stove regularly to prevent ash build up cleaning more difficult. -
Page 9: The Clean Air Act 1993 And Smoke Control Areas
It is a condition of the guarantee that only genuine Dimplex spare The Secretary of State for Environment, Food and Rural Affairs parts are used. Parts that may need occasional replacement are has powers under the Act to authorise smokeless fuels or fire bricks, ashpan, grate and log retainer. - Page 10 - 10 -...
- Page 11 - 11 - Bellingham 4.7kW Inset (BLM4iSE) BELLINGHAM 4.7KW INSET STOVE (BLM4iSE) - SPARE PARTS Item Description Part Number Item Description Part Number HAND TOOL 1/70186/0 GRATE 1/70645/0 FASCIA 1/70628/0 REAR BRICK 1/70646/0 FASCIA BASE 1/70629/0 SIDE BRICK 1/70647/0 AIRWASH 1/70630/0 BAFFLE PLATE 1/70648/0...
- Page 12 Great Britain: Northern Ireland: Republic of Ireland: GDC Group Ltd Glen Dimplex Northern Ireland Dimpco Ltd Millbrook House 5 Charlestown Avenue Old Airport Road Grange Drive Charlestown Industrial Estate Cloghran Hedge End Craigavon Co Dublin Southampton Co. Armagh Ireland SO30 2DF...