Installing Windows 2000 / Windows Xp With Raid Functions - ASROCK 775Dual-880Pro Installation Manual

Hide thumbs Also See for 775Dual-880Pro:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
This Manual: http://www.manuallib.com/file/2445972
2.10
2.10
Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
2.10 Installing Windows 2000 / Windows XP /
2.10
2.10
Installing Windows 2000 / Windows XP /
Installing Windows 2000 / Windows XP /
Windows XP 64-bit With RAID Functions
Windows XP 64-bit With RAID Functions
Windows XP 64-bit With RAID Functions
Windows XP 64-bit With RAID Functions
Windows XP 64-bit With RAID Functions
If you want to install Windows 2000 / Windows XP / Windows XP-64bit OS on your
system with RAID functions, please refer to the below methods for proper installation
according to the different Windows OS versions.
2.10.1 Installing Windows 2000 / Windows XP with
2.10.1 Installing Windows 2000 / Windows XP with
2.10.1 Installing Windows 2000 / Windows XP with
2.10.1 Installing Windows 2000 / Windows XP with
2.10.1 Installing Windows 2000 / Windows XP with
RAID Functions
RAID Functions
RAID Functions
RAID Functions
RAID Functions
If you want to install Windows 2000 / Windows XP OS on your SATA
HDDs with RAID functions, please follow the below steps.
STEP 1: Make a SATA Driver Diskette.
A. Insert the ASRock Support CD into your optical drive to boot
your system.
B. During POST at the beginning of system boot-up, press <F11>
key, and then a window for boot devices selection appears.
Please select CD-ROM as the boot device.
C. When you see the message on the screen, "Do you want to
generate Serial ATA driver diskette [YN]?", press <Y>.
D. Then you will see these messages,
Please insert a diskette into the floppy drive.
WARNING! Formatting the floppy diskette will
lose ALL data in it!
Start to format and copy files [YN]?
Please insert a floppy diskette into the floppy drive, and press
<Y>.
E. The system will start to format the floppy diskette and copy
SATA drivers into the floppy diskette.
STEP 2: Use "SATA RAID BIOS" to set RAID configuration.
Before you start to configure the RAID function, you need to check
the installation guide in the Support CD for proper configuration.
Please refer to the document in the Support CD, "Guide to SATA
Hard Disks Installation and RAID Configuration", which is located in
the folder at the following path: .. \ SATA RAID BIOS
STEP 3: Install Windows 2000 / Windows XP OS on your system.
After making a SATA driver diskette and using "SATA RAID BIOS"
to set RAID configuration, you can start to install Windows 2000 /
Windows XP on your system.
2 2
2 2
2 2
2 2
2 2
ASRock 775Dual-880Pro Motherboard

Advertisement

Table of Contents
loading

Table of Contents