Venting System With Plastic Piping - Miele PT 7186 Vario Operating And Installation Instructions

Venting system with plastic
piping
Plastic piping can be fitted using an
adapter.
The following items are required:
– an adapter.
– a wall vent kit* or window vent kit*.
– suitable plastic piping, available from
your dealer or builders' merchant.
Where the pipe diameter is more
than 100 mm, an adapter is
necessary (e.g. 100 to 125 mm) to
connect the pipe to the dryer.
(* optional accessory)
^ Fit the adapter (1) and pipe (2), as
shown.
Secure the tumble dryer against
slippage, e.g. with clamps.
Installation - extraction ducting
Example: Wall vent
1. Wall vent kit
(separate fitting instructions are
supplied with the Miele wall vent kit)
2. Adpater
3. Plastic piping,
diameter DN 100
53