L2 Functions > Lldp > Lldp Management Address Settings; L2 Functions > Lldp > Lldp Management Address Table - D-Link DGS-1210-28 Reference Manual

4 Configuration
Enabled – Enables the link aggregation configured on the port.
Disabled – Disables the link aggregation configured on the port.
Maximum Frame Size: Specifies whether the Maximum Frame Size is enabled on the port. The possible
field values are:
Enabled – Enables the Maximum Frame Size configured on the port.
Disabled – Disables the Maximum Frame Size configured on the port.
Define these parameter fields. Click Apply to implement changes made and click Refresh to refresh the
table information.
L2 Functions > LLDP > LLDP Management Address Settings
The LLDP Management Address Settings allows the user to set management address which is included in
LLDP information transmitted.
From Port/To Port: A consecutive group of ports may be configured starting with the selected port.
Address Type: Specify the LLDP address type on the port. The value is always IPv4.
Address: Specify the address.
Port State: Specify whether the Port State is enabled n the port. The possible field values are:
Enabled – Enables the port state configured on the port.
Disabled – Disables the port state configured on the port.
Click Apply to implement changes made.
L2 Functions > LLDP > LLDP Management Address Table
The LLDP Management Address Table page displays the detailed management address information for the
entry.
Management Address: Select IPv4 or IPv6 address and enter the IP address. Click Search and the table
will update and display the values required.
Subtype: Displays the managed address subtype. For example, MAC address or IPv4 address.
Figure 4.65 – L2 Functions > LLDP > LLDP Management Address Settings
Figure 4.66 – L2 Functions > LLDP > LLDP Management Address Table
D-Link Web Smart Switch User Manual
48