Miele KFNS 37692 iDE Operating And Installation Instructions page 66

Frequently asked questions
Indication in the display
Problem
The alarm symbol
; and a refrigerator
section sensor
button are flashing
in the display.
The acoustic alarm
sounds and the
power failure symbol
t appears in the
display.
The temperature
display will show the
warmest
temperature
recorded in the
freezer section
during the power
failure or
interruption to the
power supply.
66
Possible cause
The affected refrigerator
section is warmer or colder
than the set temperature,
for example, because:
– the door being opened
too frequently.
– a large quantity of fresh
food has been placed in
the freezer at once
without turning on the
SuperCool function.
– there has been a lengthy
interruption of the power
supply.
The temperature in the
appliance in the previous
days or hours has risen too
high because of a power
failure or interruption to the
power supply.
The appliance will go back
to the last temperature
setting when the power is
back on.
Solution
^ Remedy the alarm. The
alarm symbol ; will
disappear and the button
for the affected
refrigerator section will
light up constantly again.
The acoustic alarm will
stop.
Depending on the
temperature, check
whether the food has
defrosted or started to
defrost. If this is the case,
cook the food before
freezing again.
^ Touch the alarm off
button.
The warmest temperature
display will go out. The
display will then revert to
showing the current
temperature in the freezer
section.
^ Depending on the
temperature displayed,
you should check the
condition of food in the
freezer. If it has defrosted
or started to defrost,
check that it is still safe to
use and, if so, use it as
soon as possible.
Defrosted food may only
be re-frozen after it has
been cooked.