Attaching The Device To The Mount - Garmin VIRB Series Quick Start Manual

3
Plug the USB end of the cable into the
AC adapter or a computer USB port.
4
Plug the AC adapter into a standard
wall outlet.
When you connect the device to a
power source, the device turns on.
The LED is orange while the battery is
charging.
5
Charge the battery completely.
The LED turns green when the battery
is fully charged.
6
Remove the USB cable and fully close
the weather cap.
Attaching the Device to the Mount
When attaching the device to the mount,
the recommended temperature range is
from 70° to 1 OOoF (21 o to 38°C).
Your device includes an assortment of
mounting bases and arms, which can be
used in many configurations. These
instructions provide an example of one
possible configuration. You can also
purchase additional mounts for your
device, such as wearable mounts, vehicle
mounts, or a tripod mount. Go to
4
www.garmin.com/outdoor for more
information.
NOTE: By default, the camera should be
mounted with the screen facing up to
record correctly oriented video. You can
adjust the settings to record with the
screen facing down (page 7).
1
Thoroughly clean the mounting
surface using water or alcohol.
2
Remove the film from the base
CD,
and press the base firmly onto the
mounting surface.
You can use either the flat base or the
curved base, depending on the
contour of the mounting surface.