Related Manuals for Swann SP12030N
Summary of Contents for Swann SP12030N
- Page 1 Blender & Mill Item no.: SP12030N V1.0 Swan Products Limited, PO Box 3117, Stoke on Trent, Staffordshire, ST4 9GD...
-
Page 2: Year Guarantee
2 Year Guarantee This product is guaranteed for two years from the date of original purchase. If any defect arises due to faulty materials or workmanship, faulty products must be returned to place of purchase. Refunds or replacement is at the discretion of the store. The following conditions apply: 1. - Page 3 15. DO NOT USE AUTOMATIC EXTERNAL TIMERS IN CONJUNCTION WITH THIS PRODUCT U.K. Plug Wiring Instructions The wires in the mains lead are coloured in accordance with the following code: BLUE NEUTRAL BROWN LIVE As the colours of the wire in the mains lead of this appliance may not correspond with the colour markings identifying the terminals on your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured black.
- Page 4 ASSEMBLING 1. Fitting the blender jug. 2. Turn one way to lock; the other way to unlock. Note arrow positions for assistance 3. Fitting the Jar Lid 4. Fitting the Coffee Grinder/Mill base unit 5. Turn one way to lock; the other way to unlock. Note arrow positions for assistance 6.
- Page 5 Coffee Grinder/Mill Ensure the appliance is unplugged from the mains supply and the Speed Selector is set to the “0” position Fill the Coffee Grinder/Mill with coffee beans or spices as appropriate – no more than 70% full. Fit the lid of the mill. Note: the lid for the mill turns anti-clockwise to lock! Set the Speed Selector to Pulse, 1 or 2 as appropriate.
- Page 6 01733 404703 Spares reference: SP12030N-01 = blender jug SP12030N-02 = grinder/mill accessory (without lid) SP12030N-03 = grinder/mill accessory (lid only) SP12030N-04 = lid for blender jug (including cap) Visit www.swan-brand.co.uk for more great Swan products and history of the Swan Brand...