Programming Your Coffee Maker - Krups KM740D50 DEFINITIVE SERIES User Manual

KR_COFFEEMAKER_KM740D50_NAFTA_V8_OK_Mise en page 1 12/07/12 08:44 Page9
CAUTION: The coffee maker becomes very hot during the brew cycle. Please handle
Note: At any time during the brewing cycle, you can turn the coffee maker off by simply pressing the
On/Off button (k). No buttons will be illuminated, indicating that the coffee maker is off.
8- When the brewing cycle is completed, the On/Off button (k) will stay illuminated as the
keep warm cycle starts. The keep warm button (l) will illuminate orange Fig. 8
The anti drip valve will prevent any remaining coffee dripping onto the hot plate. Ensure that
the carafe is replaced on the hot plate after serving.
During keep warm mode, bars on the outside of the clock face indicate how long ago the
coffee was brewed Fig. 9.
Notes: When the brewing cycle is finished, there will still be hot liquid in the filter basket. Wait a few
minutes for the rest of the liquid to drip through into the carafe.
- The keep warm function will operate for up to two hours. During the keep warm cycle, the On/Off button
(k) will stay illuminated as well as the keep warm
cycle just by pressing the On/Off button (k). The LED will switch off and the LCD will display the clock
again.
9- Open the top lid and carefully remove the filter holder by grasping the tabs on each side of the filter
holder, and lifting straight up from the filter holder. Discard the used coffee filter and grounds. If you
use the permanent filter, wash it immediatly (see section 7 CLEANING) Fig. 10 and 11.
Note:
- If two or more pots of coffee are to be made it is recommended that the coffeemaker be allowed to cool
for 3 minutes between each brewed pot.
Auto Shut-Off
As a convenience, your coffee maker has been designed with an Auto Shut-Off feature. When the brewing
cycle is completed, the coffee maker will shut off automatically after 2 hours.

6 PROGRAMMING YOUR COFFEE MAKER

Auto on setting
1- Check to ensure that the clock is set to the correct time. If the time is incorrect, follow the instructions
in the "Setting the Clock" section.
2- Follow steps 1 through 6 in the "Making Coffee" section.
3- Press the PROG button(n).
4- Use the H (o) and MIN (p) button to set the desired start brewing hour. Refer to the AM and PM
indicators on the bottom left and right side.
7- Press the button (m). The LED light will illuminate to indicate that the coffee maker is programmed.
The digital clock will continue to show the current time.
8- Once the preset brew time is reached, the coffee maker will automatically initiate the brew cycle. The
On/Off button (k) will illuminate, indicating that your coffee maker has begun the brewing cycle. The
button (m) will switch off.
with care.
button (l). At any time you can stop the keep warm
English
9