Panasonic WV-LZ61/15 Operating Instructions Manual page 5

Flange-back Adjustment
1. Loosen the screws on the flange-back
adjusting ring of the camera.
2. Set the lens at wide position.
3. Shoot an object more than 10 meters (30
feet) away, then turn the flange-back ring of
the camera to bring the object into focus.
4. Set the lens at tele position.
5. Adjust the focus to bring the object into
focus.
6. Zoom out the object, then turn the flange-
back adjusting ring again to bring the object
into focus.
7. Repeat the procedures 4 to 6 to be in focus
over the zoom range of the lens.
8. Tighten the screws on the flange-back
adjusting ring.
Screws
- 4 -
Flange-back
Adjusting Ring