Tv Soundconnect - Samsung HW-J550 User Manual

TV SOUNDCONNECT

You can enjoy TV sound through your Soundbar when it is connected to a Samsung TV that supports the TV
SoundConnect function.
▶ Connecting a TV to the Soundbar
1. Turn on the TV and Soundbar.
Open the menu of the TV.
●
Move to Speaker Settings on the "Sound" tab.
●
Set the "Add New Device" menu to "On".
●
2. Press the ( ) button on the main unit's top
panel or the (SOURCE) button on the
remote control to select the TV mode.
3. On the TV, a message asking whether to enable
the TV SoundConnect function appears.
"[Samsung] Soundbar" is displayed on the TV
screen.
4. Select <Yes> using the TV remote to finish
connecting the TV and Soundbar.
Switching the Soundbar's mode from TV
●
to another mode automatically terminates
TV SoundConnect.
To connect the Soundbar to another TV,
●
the existing connection must be
terminated.
To terminate the existing connection,
●
press and hold the p button on the
remote for 5 seconds. To connect to the
other TV, follow Steps 1 through 4 above.
The TV SoundConnect (SoundShare)
●
function is supported by some Samsung
TVs released from 2012 on. Check
whether your TV supports the TV
SoundConnect (SoundShare) function
before you begin. (For further information,
refer to the TV's user manual.)
If your Samsung TV was released before
●
2014, check the SoundShare setting menu.
Connect
●
●
●
▶ Using the Bluetooth POWER On
function
The Bluetooth POWER On function is available after
you have successfully connected the Soundbar to a
Bluetooth compatible TV using TV SoundConnect.
When the Bluetooth POWER On function is ON,
turning the connected TV on or off will turn the
Soundbar's power on and off as well.
1. Connect the TV to your Soundbar using the TV
SoundConnect function.
2. Press the Bluetooth POWER button on the
Soundbar remote. "ON/OFF-BLUETOOTH
POWER" appears on the Soundbar's display.
ON-BLUETOOTH POWER : The Soundbar turns
●
on and off when you turn the TV on or off.
OFF-BLUETOOTH POWER : The Soundbar only
●
turns off when you turn the TV off.
●
21
If the distance between the TV and
Soundbar exceeds 16.25 ft. (5m), the
connection may not be stable or the audio
may stutter. If this occurs, relocate the TV
or Soundbar so that they are within
operational range, and then re-establish
the TV SoundConnect connection.
TV SoundConnect Operational Ranges:
- Recommended pairing range: within
20 inches (within 50cm)
- Recommended operational range:
within 16.25 ft. (5m)
The Play/Pause, Next, Prev buttons are
not operable in TV SoundConnect mode.
This function is supported by some
Samsung TVs released from 2013 on.
FUNCTIONS