Advertisement
EXCURSION
Pre-Installa on Instruc ons:
It is recommend that you have your new EXCURSION SX Series Automo ve
Speakers professionally installed by your authorizied EXCURSION dealer. This
will ensure use of proper installa on techniques and materials and save much
me and efforts. If you choose to perform your own installa on, the following
instruc on will give you direc on toward making your purchase complete. Read
the following informa on and precau ons carefully. Failure to follow the stated
precau ons may result in personal injury or damage the audio system or vehicle.
A.) Always make sure the speaker will easily fit into the intended moun ng loca on
and that there is adequate cavity depth to accept the magnet structure.
B.) Check for adequate clearance between speaker and window, window crank,
power window mechanism, seat, glove box, rear deck torsion bars and other
items which may interfere with the speaker`s moun ng. This is especially
important if any hole cu ng is required. Complete speaker, moun ng size and
depth requirements can be found on page 9 of these instruc ons. A good way to
confirm speaker place meet on a door or body panel is to place the speaker`s
die cast moun ng ring onto the surface. Check for a flat moun ng surface,
free from all obstruc on.
C.) The method of installa on choosen and level of execu on will effect the
overall performance of the EXCURSION Speakers. Thread each installa on
step with a high degree of a en on.
D.) Do not mount the speaker where water may splash the woofer cone.
A plas c cup or some heavy gauge plas c shee ng may be needed in some
loca ons that are exposed to moisture from behind the body panel.
E.) Care must be taken to prevent low frequency cancela on caused by air
leakage between the front and rear of the speaker (such as when mounted
on a curved or uneven surface, or when mounted in an oversized hole)
F.) Moun ng panel reinformcement may be necessary in some cases in order
to prevent surface flex. This can be achieved by moun ng the speaker on a
metal or wooden sub-baffle behind the body or door panel.
Consult an installa on specialst for further direc on.
3
Advertisement
