Choke Cable Installation - Yamaha WaveRunner GP800R Assembly Manual

CHOKE CABLE INSTALLATION

EXPLODED DIAGRAM
INSTALLATION CHART
Step Procedure/Part name
CHOKE CABLE INSTALLATION
1 Choke cable
Q'ty
1
Installation steps:
Install the choke cable end into the
choke lever with the choke lever com-
pletely closed.
Route the inner choke cable along the
choke lever gutter.
Install the choke cable and screw the
adjuster 1 fully into the bracket.
Align the choke lever end a within the
line marks b.
Turn out the adjuster 1 until the inner
cable is taut.
– 6 –
Service points
E