Alcatel-Lucent IP Touch 4008 Digital Quick Start Manual

US
Receiver
Alphanumeric keypad
end r edial
Audio keys
END key: to terminate a call.
Handsfree/Speaker Key: to make or answer a call without lifting the
receiver (Alcatel-Lucent IP Touch 4008/4018 Phone).
• lit in handsfree mode or headset mode (short press).
• flashing in speaker mode (long press).
Intercom/Mute key:
• During a call: press this key so that your party cannot
hear you.
• Terminal idle: press this key so that you can
automatically answer a call without lifting the receiver.
To adjust the speaker or receiver volume up or down
Function keys
Messaging key to access various mail services
If the key flashes, a new voice message or a new text message has been
received.
"Redial" key: To access the "Redial" feature.
!
To avoid accidentally damaging the set telephone line connector, make
sure you position the cord correctly in the compartment intended for
this purpose.
Navigation
Up-down navigator: used to navigate around the home
page, through the menus or in a text zone when entering
characters .
WhoAmI
The home page consists of:
• Information on the status of the set (set
locked, call forward, etc.)
Lock
• Date and time
• Set programming and configuration
Settings
features
OK key: used to validate your choices and options while programming or
OK
configuring .
Back/Exit key: to return to previous menu (short press) or return to first screen
(long press). You can also use this key to correct a character you entered.
Feature keys and programmable keys
Guide key: Use to obtain information on the pre-programmed keys or to access
the set programming or configuration.
Phone book key: Phone book key to access your personal phone book (short
press) or to make a call by name (long press or press twice).
Pre-programmed feature keys and programmable key
Lit when the feature associated with the key is activated.
The 6-key block consists of:
two line keys,
one "immediate forwarding or cancel call-forward" key,
one "conference" key,
one "manual hold" key,
one "transfer" key.
Other
Customize your terminal
Modifying your personal code
OK
Settings Option
OK
Set Password
Lock / unlock your telephone
OK
Lock
depending the displayed
informations, enter your
password or confirm *
Adjusting the audio features
Ringing
Adjusting screen brightness
Contrast
OK
confirm
Using your telephone
Identifying the terminal you are on
WhoAmI
Making a call
OR
OR
lift the
follow informations
OK
receiver
displayed on the
screen
OR
dial the number
for your call
To make an external call, dial the outside line access code
(9) before dialing your party's number.
OK
Settings Set
adjust ringing (melody,
volume, mode,...) by
OK
following instructions
displayed on the screen
to return to the
home page
(long press)
OK
Settings Set
OK
OR
increase or decrease the
contrast
to return to the
home page
(long press)
displays your
OK
telephone number
to return to the
home page
(long press)
OK
OR
handsfree to call from your personal
(Alcatel-Lucent directory
IP Touch 4008/
4018 Phone )
OK
OK