Table of Contents
Advertisement
5
1) Push the green circle of the picture then PCB LOCKING
would be unfastened so that PBA will be separated from
the Front.
7
1) Melt down both sides of Slide F-pcb Soldering pads
and separate them from the board.
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
Exploded View/Disassembly&Assembly Instructions
6
Take off the Insulation
TAPE with tweezers.
1) Take off the Insulation TAPE with tweezers.
8
ACTUATOR open
1) Open up the Actuator along the blue colored direction
arrow and detach the F-PCB.
5-5
Advertisement
Table of Contents
