Using Your Spa Ip Phone; Transferring Calls; Putting A Call On Hold; Ending A Call - Cisco SPA 525G Quick Start Manual

3 Using Your SPA IP Phone

Placing or Answering Calls
To place or answer a call, do one of the
following tasks:
• Pick up the receiver.
• Press the Speaker
• Press the Headset
• Press a line button.

Putting a Call on Hold

To put a call on hold, press the
series of beeps indicates the call is on hold.
To resume the call, press the
or the flashing red line button for the call. If you
have multiple calls, all calls are put on hold except
the active call.

Ending a Call

• If you are using the handset, hang up.
• If you are using the speakerphone, press
the Speaker button.
• If you are using the headset, press the
Headset button.
• Press the End Call soft key, if available on
your phone.
Cisco SPA 525G Quick Start guide
Connecting your business to the things that matter
www.kcbusiness.co.uk
button.
button.
Hold button. A
Resume soft key

Transferring Calls

STEP 1
During an active call, or a call on hold, press
Transfer/Trnsfer.
STEP 2
Either enter the number to which you want to
transfer the call or use the directory to choose a
number.
STEP 3
Press Dial (on some phone systems). The call is
placed on hold and a new line is opened to dial
the number.
STEP 4
To transfer the call without waiting for the other
person to answer, press
the call begins to ring and hang up. If you hang
up before the second call rings, the transfer fails
and the first call is disconnected. If you misdial,
press the line button again to receive a dial tone.
STEP 5
To transfer after speaking privately to the other
person, press Transfer/Trnsfer
the conversation.
Transfer/Trnsfer after
at any time during
Business
11