Infrared Test - Nokia 6225 Service Manual

nokia
C P
ONNECTING EOPLE
NMP/CMO Sales and Marketing Customer Care EMEA
Technical Services, Repair Concepts

13. INFRARED TEST

Infrared test
You need another infrared device (e.g. 6310i) to do a GoNoGo test. The infrared windows of the devices must be
directed to each other and should have a distance of approximate 15 cm. Make sure that infrared is activated in
receiver device.
Warning: Do not point the IR (infrared) beam at anyone's eye or allow it to interfere with other IR devices. This
device is a Class 1 Laser product.
Test unit
Settings on the test unit:
• Press the red receiver button to reach the Home Menu.
• Push the Menu key down. This displays Phonebook entries (Contacts).
• If phone is empty, create one new entry.
• Choose one phonebook entry and select Details.
• Select Options
Select Send bus. Card
•
A) - for infrared test: Select Via infrared
If sending of business card fails, make sure again that infrared windows are directed to each other and
infrared is activated in reference device. Then try again sending.
Test was successful, if you get this message on receiver device.
You will not get a confirmation on sender device.
• Press red receiver button for Home Menu.
Service Manual 6225 Level 1&2
PAGE 20 (24)
CONFIDENTIAL
Reference unit, infrared activated
Copyright 2004 © Nokia Corporation
A pproved 1.0
MGR
25.10.2004