Safety may result in serious personal injury. GENERAL POWER TOOL SAFETY WARNINGS ■ Use personal protective equipment. Always wear eye protection. Protective equipment such WARNING as dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions Read all safety warnings and all instructions.
Safety ■ Use the power tool, accessories and tool bits ■ Hold power tool by insulated gripping surfaces, etc, in accordance with these instructions, when performing an operation where the fastener taking into account the working conditions and may contact hidden wiring. Fasteners contacting a the work to be performed.
Injury to hearing – Wear suitable ear protection and WARNING limit exposure. When servicing use only identical Ryobi replacement ■ Injury to sight – Wear protective eye shields or parts. Use of any other parts may create a hazard or goggles when using the product.
Safety LUBRICATION All of the bearings in the product are lubricated with a sufficient amount of high grade lubricant for the life span of the product under normal operating conditions. Therefore, no further lubrication is required. ENVIRONMENTAL PROTECTION Recycle raw materials instead of disposing of as waste.
Page 7
Know your product 1. LED light 5. Rotation selector (Forward / Reverse / Center lock) 2. Dust protection cap 6. Trigger switch 3. Sds chuck 7. Battery port 4. Mode selector...