Insert Tools, Accessories; Technical Data - Hilti TE 50 Operating Instructions Manual

Do not use extension cords with 1.25 mm² conductor cross section.
2.12 Using extension cords outdoors
When working outdoors, use only extension cords that are approved and correspondingly marked for this application.
2.13 Using a generator or transformer
This power tool may be powered by a generator or transformer when the following conditions are fulfilled: The unit
must provide a power output in watts of at least twice the value printed on the type identification plate on the power
tool. The operating voltage must remain within +5% and -15% of the rated voltage at all times, frequency must be in
the 50 – 60 Hz range and never above 65 Hz, and the unit must be equipped with automatic voltage regulation and
starting boost.
Never operate other power tools or appliances from the generator or transformer at the same time. Switching other
power tools or appliances on and off may cause undervoltage and / or overvoltage peaks, resulting in damage to the
power tool.

3 Insert tools, accessories

Designation
TPS Theft Protection System with Company Card,
Company Remote and TPS‑K key
Chuck
Setting tool
Quick-release chuck
Dust removal system
Designation
Hammer drill bits
Breach bits
Percussion core bits
Chisels
Wood drill bits
Metal drill bits

4 Technical data

Right of technical changes reserved.
NOTE
The power tool is available in various voltage ratings. Please refer to the type identification plate for details of the
power tool's voltage and power rating.
Power tool
Rated power input
Rated voltage / rated current
Item number, description
206999, optional
TE‑Y
Setting tool with TE‑Y connection end
Keyless chuck for wood and metal drill bits with smooth
or hex. shank, Chuck holder
TE DRS‑S
Description
∅ 12...32 mm
∅ 30...32 mm
∅ 45...90 mm
Pointed, flat and shaped chisels with TE‑Y connection
end
∅ 6...35 mm
∅ 6...13 mm
TE 50 / TE 50‑AVR
1,050 W
Rated voltage 100 V: 12.8 A
Rated voltage 110 V: 12.6 A
Rated voltage 120 V: 12.7 A
Rated voltage 220 V: 5.7 A
Rated voltage 230 V: 5.8 A
Rated voltage 240 V: 5.8 A
en
17