Troubleshooting - Sony TRINITRON KV-EF29N6A Service Manual

Adjusting the PRESET setting (continued)
Changing other PRESET menu options
1
Press MENU.
2
Press V or v to move the
cursor (") to ( ), then
press .
3
Press V or v to move the
cursor (") to the desired
option, then press .
Select
To
LANGUAGE change the menu language (page 21)
AUTO PROGRAM preset channels automatically
MANUAL PROGRAM preset channels manually. See "Adding or erasing
channels" on page 28.
SYSTEM
select the color system.
Every time you press V/b/v/B, the menu item changes as
follows:
AUTO n PAL N n NTSC
AUTO n PAL M n NTSC
Normally, set this to "AUTO".
CABLE select "ON" if you use a cable TV system.
MTS
select a type of MTS stereo system.
Press to select "STEREO", "SAP", or "MONO".
For details, see "Selecting a stereo or bilingual program" on
page 16.
To go back to the normal screen
Press MENU.
Tip
• For details on the menu system and how to use the menu, refer to the
"Introducing the menu system" section on page 20.
30
Adjusting Your Setup (MENU)
Additional Information

Troubleshooting

If any problem persists, contact your nearest Sony dealer or authorized service center.
A / V CONTROL
DYNAM I C
b
STANDARD
SOF T
Snowy picture
PERSONAL
V I DEO AD J UST
AUD I O AD J UST
T I L T CORRECT : 0
PRES E T
L A NGUAGE / I D I O M A :
ENGL I SH
b
AUTO PROGRAM
MANUA L PROGRAM
S Y S T E M : A U T O
CABLE : O F F
M T S : S T E R E O
No picture
Good picture
Dotted lines or stripes
(KV-EF29N6A/
N9P)
Double images or "ghosts"
(KV-EF29N6B)
No color
Slant
Symptom Check
• Check the antenna and antenna connection on the TV and
Noisy sound
on the wall. (page 4)
• Display the PRESET menu and select "MANUAL
PROGRAM". Then, select "ATTENUATOR : OFF". (page
28)
• Display the A/V CONTROL menu and select
"STANDARD" or "SOFT."
• Press MAIN POWER.
No sound
• Press MAIN POWER on the TV to turn off the TV for
about five seconds and then turn it on again.
• Check the power cord, antenna, and the VCR connections.
• Press VOL + or VOLUME .+ on the TV.
No sound
• Press MUTING.
• Press MTS.
• This may be caused by local interference (e.g. cars, neon
signs, hair dryers, etc.). Adjust the antenna direction for
minimum interference.
• This may be caused by reflections from nearby mountains
or buildings. A highly directional antenna may improve
the picture.
• Adjust the COLOR level in the VIDEO ADJUST menu of
the PERSONAL option. (page 23)
• Display the PRESET menu and check the color system
(SYSTEM) setting. (page 30)
• Display the A/V CONTROL menu and adjust "TILT
CORRECT." (page 22)
continued
31
Additional Information